The reason why the high pressure washer does not produce water

During the use of high pressure washer, there may sometimes be a problem of not producing water. There are many reasons for this problem, such as water source issues, pipeline issues, and damaged pump heads. Today we will mainly analyze the reasons why the high pressure washer does not produce water.

1. Water source issue

When the high pressure washer does not produce water, the first thing to check is whether the water source is normal. For example, whether the water source pipeline is blocked, whether the water pressure is sufficient, whether the water is disconnected, and whether the water source is leaking. If there is a problem with the water source, it is necessary to first address the issue to ensure that the high pressure washer can work properly.

2. Pipeline issues

First, check if the pipeline is unobstructed. Pipeline problems mainly include two aspects: pipeline blockage and pipeline leakage. If a pipeline is found to be blocked, it should be cleaned in a timely manner. Usually, equipment such as vacuum cleaner tubes, vacuum cleaners, and drainage pipes can be used to clean pipelines. If there are large foreign objects in the pipeline, manual methods can also be used for cleaning. If a pipeline leak is found, it should be dealt with promptly. Materials such as sealant and tape can be used for repair, or damaged pipe fittings can be replaced.

3. Damaged pump body

If the high pressure washer still cannot produce water normally after checking all the above problems, then it is necessary to check whether there is a problem with the pump body itself. The main problems include wear and tear of internal components of the pump body, aging of seals, and bursting of the pump body.

In summary, if the high pressure washer does not produce water, multiple inspections should be conducted to identify the specific reasons and take corresponding measures to ensure the normal operation of the equipment.